Buick ManageUPS Bedienungsanleitung PDF herunterladen (Seite 35)

File Transfers

32 ManageUPSNET User Instruction Manual

complete and your connection will be lost.

You must wait about 30 seconds before

reconnecting.

Scripting mass ﬁle uploads using FTP

This section describes how to script mass ﬁle

uploads from a Windows NT/95/98 computer

using FTP.

1. Place all of the ﬁles you wish to upload into

a directory named \Manageupsnet on your

PC. The PC must be connected to the

network.

2. Ensure that all of the adapters you wish to

update are also attached to the network and

have already been conﬁgured with an IP

address, Subnet Mask and a Default

Gateway. The FTP server on each adapter

must also be enabled.

3. Using the text editor, such as Notepad,

create an FTP script ﬁle using the following

as an example.

NOTE: You may notice that the lines using the

put command have two ﬁle names speciﬁed. The

ﬁrst is the ﬁle to be uploaded the second is the

name it will receive on the server. The second

name must be one of the ﬁles listed in Appendix

, page 45.

open 198.186.180.1 21 #open FTP connection to

ManageUPS at 198.186.180.1

port 21

admin #user name

admin #password

put adapter01.cfg adapter.cfg #upload a generic config

file to the adapter

put adapter02.cfg adapter.cfg #upload an adapter specific

config file to the adapter

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 66 67

Keine Kommentare

Buick ManageUPS Bedienungsanleitung Seite 35