Buick ManageUPS Bedienungsanleitung PDF herunterladen (Seite 22)

Telnet and Terminal Console

ManageUPSNET User Instruction Manual 19

the UPS are in the following positions: Dip

switch 1 is in the down (OFF) position and

DIP switch 2 is in the up (ON) position.

Fig 8. Dip Switch Settings

3. Open a terminal program such as

HyperTerminal. Conﬁgure the session to

9600 baud, no parity, 8 data bits, 1 stop bit

and no ﬂow control. Also, conﬁgure the

session to convert all Carriage Returns (CR)

to Carriage Return LineFeeds (CRLF).

4. Type CONSOLE and press [ENTER].

5. The ManageUPS

NET will ask you for a user

name and password. The default user name

is “admin.” the default password is

“admin.” You can change the password

once you have logged in.

6. You will be presented with an option screen

where you can conﬁgure and control the

ManageUPS

NET and the UPS.

Accessing the Console

Using Telnet

You can access your ManageUPSNET over the

network using the Telnet protocol:

1. Open your Telnet client and connect to the

IP address of the ManageUPS

NET you wish

to update.

OFF

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 66 67

Keine Kommentare

Buick ManageUPS Bedienungsanleitung Seite 22