Buick ManageUPS Bedienungsanleitung PDF herunterladen (Seite 27)

File Transfers

24 ManageUPSNET User Instruction Manual

9. The Web server will provide status pages

during the ﬁle transfer. When the update is

complete the browser will be redirected

back to the main web interface page.

Upgrade Using the Console and TFTP

The following steps should be followed when

updating the ManageUPS

NET using the Telnet

or Serial Console and TFTP.

1. Obtain the latest

ﬁrmware(ﬁrmware260x.gz) from ONEAC

and place it in a directory on your TFTP

server.

2. Ensure that the adapter is attached to the

network and has already been conﬁgured

with an IP address, Subnet Mask and a

Default Gateway. The FTP server must also

be enabled.

3. If you are using Telnet go to step 4, if you

are using serial communications then skip

to step 5.

4. Open your Telnet client and connect to the

IP address of the ManageUPS

NET adapter

you wish to update. Skip to step 9.

5. Connect the ManageUPS

NET to an available

serial port on your computer

6. Open a terminal program such as

HyperTerminal. Conﬁgure the session to

9600 baud, no parity, 8 data bits, 1 stop bit

and no ﬂow control. Also conﬁgure the

session to convert all Carriage Returns (CR)

to Carriage Return LineFeeds (CRLF).

7. Type CONSOLE and press [ENTER].

8. The ManageUPS

NET will ask you for a user

name and password. The default user name

is “admin” the default password is

“admin.” Yours may be different.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 66 67

Kommentare zu diesen Handbüchern

Keine Kommentare