Buick 2007 Rendezvous Bedienungsanleitung PDF herunterladen (Seite 195)

To adjust the HUD so you can see it properly, do

the following:

1. Start your engine and turn the dimmer knob to

the desired HUD image brightness.

The brightness of the HUD image is determined

by the ambient light conditions in the direction

your vehicle is facing and where you have the

HUD dimmer knob set. If you are facing a dark

object or a heavily shaded area, your HUD may

anticipate that you are entering a dark area and

may begin to dim.

2. Adjust the driver’s seat. If you change your

seat position, you may have to readjust

your HUD.

3. Press the UP or DN buttons until the HUD

image is easy to see and then press the DN

button until the HUD image is as low as

possible, but remains in full view straight

ahead near the front bumper.

The HUD image can only be adjusted up and

down, not side-to-side.

4. To turn the image off, turn the dimmer knob

counterclockwise until it stops.

If the sun comes out or it becomes cloudy, you

may need to adjust the HUD brightness again

using the dimmer knob. Polarized sunglasses

could make the HUD image harder to see.

When you ﬁrst start the vehicle the display will

show BUICK and the Buick logo for a few seconds.

If it is cold outside, this display may stay on for

up to a minute.

Clean the inside of the windshield as needed to

remove any dirt or ﬁlm that reduces the sharpness

or clarity of the HUD image.

195

1 2 ... 190 191 192 193 194 195 196 197 198 199 200 ... 527 528

Kommentare zu diesen Handbüchern

Keine Kommentare