Buick 2007 Rendezvous Bedienungsanleitung PDF herunterladen (Seite 126)

It is possible for the PASS-Key

®

III decoder to

program the transponder value of a new or

replacement key. Up to 10 additional keys may be

programmed for the vehicle. This procedure is

for programming additional keys only. If all

the currently programmed keys are lost or do not

operate, you must see your GM dealer or a

locksmith who can service PASS-Key

®

III to have

keys made and programmed to the system.

See your GM dealer who can service

PASS-Key

®

III to get a new key blank that is a cut

exactly as the ignition key that operates the

system.

Canadian Owners: If you lose or damage your

keys, only a GM dealer can service PASS-Key

®

III

to have new keys made. To program additional

keys you will need two current driver’s keys, black

in color. You must add a step to the following

procedure. After Step 3 repeat Steps 1 through 3

with the second current driver’s key. Then

continue with Step 4.

To program the new PK3

®

key do the following:

1. Verify the new key has PK3 stamped on it.

2. Insert the original key in the ignition and start

the engine. If the engine will not start, see

your GM dealer for service.

3. After the engine has started, turn the key to

OFF, and remove the key.

4. Insert the key to be programmed and turn it to

ON within 10 seconds of removing the

previous key.

5. The SECURITY message will turn off once

the key has been programmed. It may not

be apparent that the SECURITY message

went on due to how quickly the key is

programmed.

6. Repeat Steps 1 through 4 if additional keys

are to be programmed.

If you are ever driving and the SECURITY

message comes on and stays on, you will be able

to restart your engine if you turn it off. Your

PASS-Key

®

III system, however, is not working

properly and must be serviced by your GM dealer.

Your vehicle is not protected by the PASS-Key

®

III

system at this time.

126

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 527 528

Kommentare zu diesen Handbüchern

Keine Kommentare