Buick 2004 Park Avenue Bedienungsanleitung PDF herunterladen (Seite 48)

100

101

Securing a Child Restraint Designed

for the LATCH System

1. Find the anchors for the seating position you want

to use, where the bottom of the seatback meets the

back of the seat cushion.

2. Put the child restraint on the seat.

3. Attach the anchor points on the child restraint to

the anchors in the vehicle. The child restraint

instructions will show you how.

4. If the child restraint is forward-facing, attach the top

strap to the top strap anchor. See Top Strap on

page 1-38. Tighten the top strap according to

the child restraint instructions.

5. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, simply unhook the top

strap from the top tether anchor and then disconnect the

anchor points.

Securing a Child Restraint in a

Rear Outside Seat Position

If your child restraint is equipped with the LATCH

system, see Lower Anchorages and Top Tethers for

Children (LATCH System) on page 1-40. See Top Strap

on page 1-38 if the child restraint has one.

If your child restraint does not have the LATCH system,

you’ll be using the lap-shoulder belt to secure the child

restraint in this position. Be sure to follow the instructions

that came with the child restraint. Secure the child in the

child restraint when and as the instructions say.

1. Put the restraint on the seat.

2. Pick up the latch plate, and run the lap and shoulder

portions of the vehicle’s safety belt through or

around the restraint. The child restraint instructions

will show you how.

1-42

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 409 410

Kommentare zu diesen Handbüchern

Keine Kommentare

Buick 2004 Park Avenue Bedienungsanleitung Seite 48

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Buick 2004 Park Avenue