Buick 2004 Park Avenue Bedienungsanleitung PDF herunterladen (Seite 134)

Perimeter Lighting

When the unlock button on the remote keyless entry

transmitter is pressed, the DRL, parking lamps and

back-up lamps will come on if it is dark enough outside.

This feature will only be activated when the security

feedback feature is programmed to be in Modes 1, 3

or 5 on the transmitter. Modes 0, 2 and 4 do not respond

with exterior lights ﬂashing when unlocking the vehicle

so perimeter lighting will not be active.

This feature can be programmed on or off for each

transmitter.

To turn the feature off do the following:

1. Press and hold LOCK on the driver’s door lock switch

throughout this procedure. All doors will lock.

2. Press the remote alarm button on the transmitter to

enter the programming mode. Perimeter lighting

remains on at this time and the horn will chirp

two times.

3. Press the remote alarm button on the transmitter

again. Perimeter lighting is disabled and the horn

will chirp one time.

4. Release the door lock switch. The perimeter lighting

feature is now off.

To turn the feature on do the following:

1. Press and hold LOCK on the driver’s door lock

switch throughout this procedure. All doors will

lock.

2. Press the remote alarm button on the transmitter to

enter the programming mode. Perimeter lighting

remains off at this time and the horn will chirp

one time.

3. Press the remote alarm button on the transmitter

again. Perimeter lighting is now enabled and the

horn will chirp two times.

4. Release the door lock switch. The perimeter lighting

feature is now on.

Perimeter lighting can also be activated through the

DIC. See DIC Vehicle Personalization on page 3-51

or Driver Information Center (DIC) on page 3-47.

3-16

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 409 410

Keine Kommentare

Buick 2004 Park Avenue Bedienungsanleitung Seite 134